| Shaft Tooska ah oo Bare Ku Xidhan Matoorka Korontada ama Matoorka | |
| Naqshadeynta | Waxqabadka iyo cabbirrada tixraacaya heerka Yurub |
| Qaab dhismeedka | Semi-furaha, Horizontal, Hal-Marxalad, Kali-nuujin, Is-doorbid |
| DN (mm) | 40-200 |
| Flange | Dhammaan matoorrada J waxaa lagu shubay flange |
| Casing | Heerka Birta Cast, Birta Ductile optional, Bronze optional |
| Impeller | Heerka Birta Ductile, Bronze, ASTM304, ASTM316 ikhtiyaari ah |
| Shaf | Heerka ASTM1045, ASTM304, ASTM316, ASTM420 ikhtiyaari ah |
| Shaft Seal | Shaabadda Makaanikada (Sic-Sic/Viton) |
Bamka bulaacada ee iskiis u hagaajiya
01
J Taxanaha Bamka bulaacada ee Is-doorashada
01
Sharaxaada
Is-xakamaynta degdega ah: waalka aan istaagin. Marka lagu buuxiyo biyo, bamka si toos ah ayaa loo soo saaray ilaa 7.6m.
Dhisme fudud: hal qayb oo kaliya oo dhaqaaqa mashiinnada.
impeller-daab furan jidaynayey ee jirka ballaaran oo adag oo fudud.
Iska caabbinta sare ee dareeraha xoqan ee saxanka xirashada ayaa si fudud loo beddeli karaa.
Shaabada farsamada axial oo laga soo saliiday dibadda: ma jiro wax daadin ah ama dhexgelin hawo oo ku taal usheeda dhexe.
Si fudud loo rakibo: kaliya tuubada nuugista waxay u baahan tahay in lagu geliyo meesha iquid, meesha ugu habboon ee adeegga iyo xakamaynta.
Nolosha dheer: qaybaha ay xiran yihiin si fudud ayaa loo bedeli karaa, dhowr jeer marka loo baahdo, dib u soo celinta waxqabadka asalka ah ee bamka.
Hawada (Falaaraha jaalaha ah) waxaa lagu soo jiidaa bamka sababtoo ah cadaadiska taban ee uu abuuray impeller dhaqaaqa iyo haddii lagu daro dareeraha (Falaaraha buluuga ah) ee ku jira bamka.
Emulsion-ka-dareere-haweedka waxaa lagu qasbaa qolka hore ee meesha hawada khafiifka ah ay ka soocdo oo ka baxdo tuubada dheecaanka; Dareeraha culus ayaa dib ugu soo noqda wareegga wareegga. Marka hawada oo dhan laga saaro tuubada nuugista, bamka waa la nadiifiyaa wuxuuna u shaqeeyaa sida bamka dhexe ee caadiga ah. Bamka waxa kale oo uu ku shaqayn karaa isku darka dareeraha hawada ah.
Waalka aan soo laaban wuxuu leeyahay laba shaqo; waxay ka hortagtaa tuubada nuugista inay faaruqiso marka bamku dansan yahay; Haddii ay dhacdo faaruqinta shilalka ee tuubada nuugidda, tani waxay haysaa qadar ku filan oo dareere ah oo ku jira bamka si uu u hagaajiyo bamka. Tuubbadu waa inay xor u ahaato inay ka saarto hawada ka imanaysa tuubada nuugista.
02
Naqshadaynta & Qalabka
03
Xogta shaqaynaysa
| Heerka socodka(Q) | 2-1601/s |
| Madaxa (H) | 4-60m |
| Xawaaraha | 1450 ~ 2900 rpm (50HZ), 1750 ~ 3500 rpm (60HZ) |
| Heerkulka | ≤105℃ |
| Cadaadiska Shaqada | 0.6 MPa |
| Max adag | 76 mm |
04
Codsiga
● Warshadda Daaweynta Biyaha Qashinka.
● La-dagaalanka Dabka Degdegga ah ee la qaadan karo.
● Badda - Ballasting & Bilge.
● Xawilaadda dareeraha ah: Gudbinta dareeraha ka kooban ciid, qayb iyo adkaha ee cayrinta.
